Available now at Northeast Music Center!
Fundamental Reverb
The Fundamental Reverb provides you with the core sounds of ambient effects. With three reverb algorithms, you can go from an ambient hall to an analog spring emulation, as well as a bright plate emulation.
Decay: Control the amount of reverb decay time. Left is the minimum and right is the maximum amount of time.
Tone: Control the amount of overall brightness to the reverb
Mix: Control the mix of the effect and the original clean signal. All the way to the left outputs only the fully clean signal, and all the way to the right outputs only the affected Reverb signal.
Slide Switch – The slide switch allows you to change between three distinct Reverb algorithms.
Trails Modes – The Reverb comes with trails mode active by default, to disengage trails mode hold down the bypass stomp switch when applying power to the pedal. Once the LED flashes it indicates that trails mode is turned off. To re-engage trails mode, repeat the process, and wait for the LED to turn dark, indicating that trails mode is back on. With trails mode active, your reverb decay will fade off naturally after turning the pedal off. With trails mode inactive, the decay abruptly cuts off when you turn off the pedal.
Specifications:
