Walrus Audio
Walrus Audio Mako Series MkII: ACS1 Amp + Cab Sim
- SKU:
- ACS1
- UPC:
- 810424036345
- Condition:
- New
- Availability:
- Order by 3:00PM EST for same day shipping.
- Shipping Weight:
- 1.00 LBS
- Shipping:
- Free Shipping
Available now at Northeast Music center!
The [ACS1]™ is an amplifier and speaker cab simulator delivering the sound and feel of world-class amplifiers, complimentary speaker cabinet IRs created by Tone Factor and York Audio, and controllable room size. With the ACS1, players have expansive options to deliver their tone on stage, in the studio, or practicing at home. Simple controls, stereo in and out, onboard presets, and MIDI support make the ACS1 an essential tool in a guitarist's arsenal. Players can also load in their own IRs and update firmware at walrusaudio.io.
The ACS1 contains six amplifier models based on fan-favorite amps, each with its place in music history, and twelve cab IRs (Impulse Responses) designed by world-class designers to give you the best tonal representation possible. The stock IRs for the Fullerton, London, and Dartford amp models were custom-engineered by David Hislop and Kenyon Reed at Tone Factor, while the stock IRs for the Red, Citrus, and Tread amp models were designed by Justin York at York Audio.
Amplifiers
The ACS1 can mix and match stereo amp and cab combinations. Want to run an AC30-style amp on the left and an Orange-style amp on the right? Or perhaps a 5150 flavored amp in both channels but with two different cabs for a wider stereo sound? When running the ACS1 in stereo, one amp can be used through both channels, or these combinations can be run independently left and right if you choose, leading to powerful, unique amp tones. Simply press down on the Middle encoder to choose individual settings for L, R, or L+R combined. Amps can be mixed and matched with no phase/polarity issues as well.
Onboard models include:
Three Vintage Amp Models
Fullerton - Inspired by the classically bright and clear Fender® Deluxe Reverb. Crisp clean tones with loads of headroom that players have come to love over the years.
London - Inspired by a 1962 Marshall® Bluesbreaker with a harmonically rich, valve-driven breakup. Articulate and sensitive response.
Dartford - Inspired by the legendary jangly high-end tones from a 1960s Vox® AC30 with all the bite and chime from the British Invasion.
Three High Gain Amp Models
Red: Inspired by the distinctively raw and punchy Peavey® 5150, producing heavy, aggressive modern metal and hard rock sounds. Powerful and saturated with a tight low end, strong midrange, and a bright, cutting high end.
Citrus: Inspired by the warm, rich, and harmonically complex Orange® Rockerverb. Classic British gain with a creamy midrange and punchy lows. Maintains clarity and definition across its entire tonal spectrum, even at high-gain settings.
Tread: Inspired by the world-famous Mesa Boogie® Dual Rectifier with massive amounts of in-your-face gain. Versatile enough to be favored by guitarists in genres from hard rock, punk, metal, and more, Tread offers up plenty of saturation that’s heavy and ready to cut through the mix.
Cabinet IRs
The ACS1 includes six IRs custom-engineered by David Hislop and Kenyon Reed at Tone Factor and six by Justin York of York Audio. Each IR has been created with vintage and modern amps to deliver the best tonal representation possible.
Users also have the option to load their own IRs via our customer web app found at walrusaudio.io.
Additional ACS1 Settings/Features
Primary Controls
Volume, gain, and room make up the top three knobs. Volume and gain work together, as gain is increased and made louder, volume can be turned down to compensate.
Room
The ACS1 has three different types of reverb effects:
Room - Simulates the size of the room that your amp and cabinet are in. At zero, it would resemble tracking your amp in an isolated environment with no reverb. At max would emulate a natural-sounding, large studio environment.
Hall - Simulates the acoustics of a large, live sound space.
Spring - Simulates spring reverb tanks found in tube amps.
Increase the room size or amount of reverb by adjusting the Room knob. The further clockwise you go, the bigger the room. Decay control can be adjusted for room in the Global Sound menu.
Bass/Mid/Treble EQ
Bass, mid, and treble control are adjustable on the home screen with the use of the encoder knobs. The left knob controls bass, the middle is mids, and the right is treble. This simple EQ control has clear visual feedback and can be used to adjust levels on the L, R, and L+R channels.
Noise Gate
A noise gate can be applied and adjusted within the navigation menu, which can be especially helpful when playing with the high-gain amp models.
Amp EQ
Presence and resonance controls are available within Amp EQ Settings in the menu, giving you even more control of your amp tone.
(Access the settings for noise gate, Amp EQ, and more by clicking the bottom left and middle encoder knobs simultaneously).
Bypass IRs or Amps
Cab IRs as well as amp models can both be bypassed with the ACS1, making it more flexible for ampless rigs that still have physical cabs, and vice versa. Access these settings by clicking the bottom middle and right encoder knobs simultaneously.
Presets
Save up to three presets onboard by dialing in your favorite sound then pressing and holding the bypass and boost switch simultaneously. Both LEDs will flash confirming your settings were saved. Cycle through presets by pressing and releasing bypass and boost simultaneously. The pedal will cycle through the three onboard presets - red, green, and blue. Additional banks and presets can be accessed in the Global Sound menu by pressing down the Left and Middle encoders simultaneously. When power is removed from the pedal, it will boot up in the last used preset. Using MIDI, up to 128 presets can be saved and recalled.
Specifications:
- True Bypass and Buffered Bypass
- The ACS1 MKII comes in an anodized gold finish with black and green ink.
- The 2in OLED screen measures 128x32 pixels.
- The enclosure’s exact size with knobs is 4.9” x 2.52” x 2.64”.
- Power requirements are 9VDC (300mA minimum).
- The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.
- 24-bit 48kHz A/D and D/A converters for high quality audio.
- 32-Bit floating point processing.
- Sharc & ARM co-processors.
- Update firmware and load IR cabinets at www.walrusaudio.io
Shipping
We can ship to virtually any address in the world however our Website is optimized for USA sales. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based as well as Distance based and now Dimensional weight based (the actual size of the shipping box) . The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound. Please note that some shipping companies ship by Box Size
We ship primarily through UPS, but can also ship through the United States Postal Service or FedEx at the buyer’s request. For any Worldwide shipments we use UPS or USPS. The shipping price you are charged covers transit, insurance, proper packing, and tracking. If you prefer another shipping method please let us know so we can accommodate your needs. In the event of damage in transit we will help facilitate a claim with the shipping company to ensure full refund.
Returns Policy
We offer a 72 hour approval period on all guitars, amplifiers, and pedals from the date of purchase for in store transactions or date of delivery for internet orders. This approval period is for the buyer to make sure that the instrument is in the condition and originality we advertised. In the event of any return the buyer pays all shipping and insurance costs, both to and from, as well as any other fees associated with the transaction.
You should expect to receive your refund within 2 business days of us receiving your package from the return shipper. This time period does not include the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 3 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
PLEASE CALL US FIRST at (570) 909-9216 If you need to return an item, You can then simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
For logistical reasons we are unable to accept returns or cancellations on any item that was special ordered. All returns must be approved by phone or email and must be returned in the exact condition they left our store. Any item returned not in the same condition it left our store is subject to a 20% restocking fee at our sole discretion. For logistical reasons we are unable to accept returns on any transaction involving a trade, both in store and online. Unauthorized returns will be refused and returned at customer's expense. Please know we go to great lengths to ensure with 100% confidence that you are getting the exact item you purchased in the condition and originality described. We strive to earn your business.
Layaway
We offer a 60 day layaway program for all items in our store. A 20% non-refundable deposit is required and hold the item for up to 60 days. In the event of layaway cancellation, the 20% deposit will be forfeited.
Accepted Methods of Payment
Cash, Visa, Mastercard, Discover, American Express, PayPal and Wire Transfer. If you have any questions regarding payment please ask.